Welcome to our tutorial! We will begin with the fun part, firstly draw a panda that is going to add some cherish attitude toward our hoverboard. Let’s get started, it will be fun drawing with us.
Start with a sheet of white paper in landscape mode. Find the center top of the paper and make an upside-down “U-shape” that is equal on both sides. From the right end of the upside-down “U-shape”, draw the outline of our panda’s back moving downward in a circular shape. On the right end of the upside-down “U-shape”, we are going to add the panda ears.
Now start from the little down to the center curve of the “C-shape” structure, draw a half squoval shape having notches that are not a smooth line and ending on the equal length of the mirrored backward “C-shape” structure.
The fun part is adding safety glasses to the panda, which we are going to draw in this step.
To draw the panda’s snout, draw an extended inverse comma shape structure to the downward direction, starting from the free end of a shape structure. And draw an upward arc from the endpoint of the inverted comma shape. Draw a free comma a little distance from the arc.
Draw the teeth of the panda on the top of the mouth.
Finish drawing the mouth and the teeth.
Draw a half ocular shape connecting one side to the right curved line. Draw the tongue of the panda.
Now fill the entire mouth with a black pencil, except the teeth and the tongue.
Finish drawing the outline of the panda’s head.
Draw the nose of the panda.
Fill the nose with a black pencil.
Now join the straight line of the glasses with the extended inverse comma shape structure using a circular line. Also, draw another similar line at a little distance from this line.
Draw the right eye of the panda, fill this shape with a black pencil.
Add the second ear and fill both ears with a black pencil. Also, draw 5-6 dashes in a random alignment on the bottom right side of the panda’s face.
Draw an uneven line having one hook at the center, starting from the bottom of the head. At the end of the line draw a little hook shape, pointing inwards to the body of the panda.
Now elongate the horizontal line of squoval in a slightly bent direction. Draw another line having some notches in the body’s corner that equals the length of another bent line. Now join the two lines with a slightly wavy line. Now draw a straight line at an angle of 30 degrees passing from that line that is connecting the two lines. At the end of the straight line, draw a hook and then draw a straight horizontal line, and then a closed hook shape at the end.
Draw a half square starting from the hook of a straight line and connecting it with the above circular line. Mark an incision at the corner point of the square.
Draw a double vertical line starting from the center of the straight line and ending with a loop at the end. Also, draw a slightly curved arc on the lower portion of the vertical line. Double the line from the curve point.
Draw an upside-down chili shape at the bottom right point of the panda adjoining with the two points. From the forward part of the chili, the shape draws a little circular line.
Draw another circular line in the mirrored opposite direction at the end of the lobe structure. Now connect the two circular lines by making an elongated cloud structure at the end. The elongated cloud shape starts at a centimeter (0.4 inch) before the left circular line and ends at two centimeters (0.8 inch) or more to the right circular line. Behind that, draw various straight lines at an angle of 30 degrees with one line that is broken into three small lines.
Draw various elongated shapes within the wheel and a little round shape in the center.
Draw a straight horizontal line passing from the feet of the panda, extending the left foot. Draw another horizontal line just below the above line, maintaining a little distance. Join the open ends by drawing a circular line, making a tube-like shape. Double line the lower line.
Draw a circle on the left end of the tube-like structure drawn above with the ends joining with the panda body on one side and hoverboard on another side. Draw a circular line in the middle of the circle and now draw three elongated shapes in the lower portion of that circle.
Draw a wavy line joining the left circle with the tube-like structure. Also, draw some random straight lines below the tube-like structure.
Draw a circular line in a slightly bent direction, joining the horizontal straight line with the line having sharp notches.
Draw a wavy line joining the face of the body with the neck. Draw another small circular line at a distance of a centimeter (0.4 inch) from the previous line. Now draw another wavy line at half a centimeter (0.2 inch) from the previous line and joining to the circular line. Draw another small line along with this line at the beginning, where it connects with the outer line.
Fill in the panda’s body, leaving the central rounded rectangular shape and the horizontal tube-like areas. Make sure not to fill the rectangular shape.
Fill in the right tire of the hoverboard, leaving the lobe-shaped area, the small central circular shape, and small elongated structures in that area.
Fill in the lower portion of the left tire of the hoverboard, leaving the elongated shapes in it.
Fill in the remaining portion of both tires with an orange color and the entire hoverboard and the tongue.
Draw some random dashed lines in the triangular portion of the panda body. Draw various dashed lines at the lower portion of the rectangular option.
Draw a line with slight waves joining the upper mouth to the lower circular line. The fun part is to fill in the glasses with a blue color, leaving the eyes area.
Congratulations, your panda on the hoverboard is ready to ride!